Jeep Trac Bar Mount Frame Side 77-95 Jeep YJ, CJ Front Steel Bare Kit GenRight

This is the GenRight Frame side Trac Bar Mounting Bracket Kit for the Jeep Wrangler YJ and CJ. This is the same design we have reliably run on our GenRight Jeeps for years, including on Jordans 4500 Class KOH racer!
Front Trac Bar Bracket Kit Features:

• Designed for use on a YJ or CJ that has a linked suspension
• The mount is specifically spaced for a YJ or CJ to match the pitman arm on your frame
• Laser cut from super thick steel so the pieces fit together like a glove
• Interlocking puzzled design
• Uses a 9/16 inch bolt in double shear
• Designed for a 2.625 inch wide Johnny Joint, heim, or bushing
• Welding Required
• Unpainted Finish
• Sold As A Kit

Notes:

• Sold as a weld-on kit
• This kit requires cutting off the stock trac bar mount and welding on this New mount
• A trac bar between the frame and front axle are required, Before use. (Axle side bracket FSM1003, sold separately)
• Designed to work with our 3 link but can be adapted to work with just about anything
• Once installed, you Must cycle the front suspension and steering (in all possible combinations and directions) to make sure None of the steering or suspension Components Will bind or otherwise collide with each other. Do noot exceed the range of motion which would damage the steering or suspension Components and could cause a failure resulting in a loss of steering control