Jeep Corner Guard Set Stretch 97-06 Wrangler TJ Rear Steel Bare GenRight

This is the GenRight Off Road Full Stretch Corner Guard set for the Jeep TJ. These are a direct bolt-on and a perfect upgrade to better protect your Jeeps tub. This model is an ideal choice when Stretching your Rear axle back to keep the wheel opening centered over the relocated axle. Why do you need that? So you can maintain that clean factory look and to be able to re-mount the Rear flares.
Features:

• Fits the Jeep Wrangler TJ
• Wheel opening is moved back/Stretched 4 inches to fit with our EXT gas tank P/N GST-2002
• Laser cut from 3/16 inch thick SOLID steel plate, just like our rock sliders
• The 90 degree bend is formed with a single-hit die on a CNC press brake to assure this product matches the shape of your Jeeps tub
• Stock wheel opening shape is retained the same to still fit a stock CJ fender flare or the GenRight metal tube Rear flare P/N TFR1000 and remain street legal
• Each set of panels has the factory mounting holes laser cut in for the tail lights and gas filler to make installation quicker
• The mounting holes are pre-drilled and countersunk - we use 2 more mounting bolts than other brands - to secure the corner to the tub
• Includes large 5/16 inch flush type and countersunk Stainless Steel bolts to securely mount our corners to protect your Jeeps tub and look clean!
• Also Includes a New molded plastic fuel bezel to allow the 4 inch shift backward of the wheel opening
• Fits on top of most 6 inch tall aftermarket 3/16 inch thick Rocker Guards or rock sliders
• Unpainted Finish
• Sold As A Set

Notes:

• Wheelbase Stretch is done with the suspension arms, Not the traditional way of cutting the frame and body. The Stretch corner guard is a clean cosmetic way to relocate the wheel opening Rearward to match the New Rear axle location under the vehicle
• We recommend running our longer Stretch Rocker Guards P/N RCG-5002 or RCG-5003 to match the New relocated wheel openings and Stretch Miniboat sides Rockers are also available
• The stock license plate mounting holes have been Removed from the drivers side panel.
• Because the stock location is much to vulnerable. We recommend using our license plate relocation bracket/light kit to get the license plate moved into the center of the spare tire P/N LPM-4006
• This product requires drilling of the body/tub to properly mount them
• The stock Rear flare mounting holes have been Removed from these panels. If you are installing Rear flares, you Will need to drill New mounting holes in the corner guard panel
• We offer a bolt-on/no cutting LED tail light upgrade as an option
• Wheel openings on corner guard and body can be trimmed to fit Bigger tires
• We Do noot make a model specifically for Hi-Fender flares, the wheel openings Will need to be trimmed to match the tube flare P/N TFR1020 or TFR-1021 by the installer
• The Full Corners are sold unpainted and should be Fully fitted, then Removed, for painting
• We also offer a matching Tub Panel Guard P/N TPG-1001
• The same corner guard is also available in a light weight aircraft Aluminum version P/N CNR-2013
• Recessed or Flush type LED tail lights P/N LED-1100 can be installed by cutting a 4.5 inch diameter hole
• We also offer this product in a Blank with Nowheel well, holes or hinge cut outs
• Approximately 30lbs each
• Typical install time is 4 hours total