1310 O.E. Replacement Front Driveshaft Manual Transmission 2018 Wrangler JL Reel Driveline

1310 front driveshaft for 2 and 4 door Jeep JL models with an automatic transmission. O.E. Replacement Driveline. This System is recommended for stock to 2 1/2 inch lift and up to 33 inch tires for mild use. J.E. Reel Drivelines O.E. assemblies are designed to work with up to 2 1/2 inch lifts from most lift manufacturers. It is best to measure all drivelines if possible.

The purchaser shall be responsible to determine all design and/or specification parameters and the suitability of any particular product for its intended use.

Note: JL 2018 Powertrain is installed at 9.25 Degree. This means the Transfer Case rear output slopes down to rear axle and front output slopes up away from front axle. This is especially important to consider on the 2018 model JL.

Details:

• Collapsed Length 36.625 inch
• Ride Height 38.125 inch
• Extended Length 39.625 inch
• U Joint Style 1310 W/ ZERK
• Tube size 2.00X.120 Inch
• T/C Yoke 2-4-5341-10R
• Max Tire 33 Inch

Kits Include:

• Pinion Yoke
• Transfer Case Yoke
• Retaining Hardware
• Fastners Included